主頁 >日立Hitachi ZV75R馬路跳鎚機/快速沖擊夯/電動震動(振動)衝擊夯/電動蛙式夯 建築機械五金
產品名稱:
日立Hitachi ZV75R馬路跳鎚機/快速沖擊夯/電動震動(振動)衝擊夯/電動蛙式夯 建築機械五金
產品型號:
ZV75R
相關字:
產品價格:
即時報價:
點擊次數:
1827
刊登日期:
2017-06-30 16:17:01
更新日期:
2020-05-22 12:21:34
標籤:
 

香港五金網會員享有特別優惠!(聯絡時請說明)

 

日立Hitachi ZV75R馬路跳鎚機/快速沖擊夯/電動震動(振動)衝擊夯
建築機械五金
 
型號:ZV75R

 


 

馬路跳鎚機利用衝擊和衝擊振動作用分層夯實回填土的壓實機械。分電動衝擊夯、汽油衝擊夯和振動衝擊夯等。

 
日立Hitachi ZV75R馬路跳鎚機/快速沖擊夯/電動震動(振動)衝擊夯/電動蛙式夯基本資料
The rammer is stored in upright position. Thus, if it is stored for long, the oil that coats the inner pipe and outer pipe, the two sliding areas, descend into the oil pool of the protector. Then, the sliding areas lose their oil ? lm. If the engine is started and the machine is operated in the oil ? lm shortage state, abnormal wear develops in the sliding areas. This can cause galling or sticking. In order to prevent oil ? lm shortage for machines that are stored for long, we ask that you lubricate the sliding areas of the outer and inner pipes to coat them with oil by following the procedure stated below.

 
日立Hitachi ZV75R馬路跳鎚機/快速沖擊夯/電動震動(振動)衝擊夯/電動蛙式夯使用程序
 
Work procedure
Lubrication of the sliding areas of the inner and outer pipes Note: Carry out the replacement work on ? at ground. 
 
1) Place the rammer in upright position on flat ground. Turn the fuel cock to “0.” Close the cock. 



2) Push the rammer forward


3) Raise the foot so that the angle between the shaft line of the rammer and the ground is at least 10 degrees. Place a sleeper or such under the foot.


For 3 minutes, hold as shown in the Fig. 5. Wait until the oil inside the protector rises to the inside of the crank case. The following chart shows the estimated heights of sleepers (measurement A) that need to be placed under the feet of various models.

4) Remove the foot from the sleeper and place the rammer in upright position. The oil that has risen to the crank case will pass through the sliding areas of the outer and inner pipes and return to the protector. This will lubricate the sliding areas. 


 
歡迎查詢日立Hitachi ZV75R馬路跳鎚機/快速沖擊夯/電動震動(振動)衝擊夯/電動蛙式夯-詳細資料
聯絡我們
聯絡人:黃先生
電話(公司): 2388 3567 或 2780 9629
電話(手提): 60535000
傳真: 2770 4783
電郵: ssmpcltd@gmail.com
免責聲明
(1)以上所展示的信息由企業自行提供,內容的真實性、準確性和合法性由發佈企業負責,香港五金網對此不承擔任何保證責任。
(2)同時我們鄭重提醒各位買/賣家,交易前請詳細核實對方身份,切勿隨意打款及發貨,謹防上當受騙。如發現虛假信息,請向全球五金網舉報。